Channel Map Functions Edit/Add Map – Opens the Channel Map Editor to create or edit a Channel Map. Write – The FTG Channel Map is transferred to the FTG card and the TV/STB. Read – The FTG Channel Map is transferred from the FTG card to the application. Learn – The TV/STB Channel Map is “learned” from the TV/STB and transferred to the FTG card and software. If you are at an office or shared network, you probably can ask the community administrator to run a scan throughout the network on the lookout for misconfigured or contaminated gadgets. Configuration file, the TV setup menu settings usually are not out there for editing.
Sound and videos could be managed instantly by a pillow speaker for affected person comfort. HCS1410 LED Indicators The LED, visible by way of the opening behind the removal hook, will glow RED when it is first powered up and can stay lit till the cardboard has completed initializing. • The LED will glow GREEN if there is exercise to/from the PC. • The LED will glow RED if there might be exercise to/from the TV/STB. RS-232 PORT Connect RS-232 Null Modem cable here from a PC to configure the FTG card.
Multi IR function eliminates the sign interference of remote controls that happens between TVs in a quantity of rooms. This system also works on the same LG TV mannequin. The card translates the channel up/down instructions into direct access tune commands starlight revue tier list. There is a recently found problem with the LST5600A when on cable band. Unfortunately, this product is EOL’d and there’s no known work round. Do the channel mapping procedure together with modifying.
The FMA can broadcast a quantity of Installer Menu profiles to support the different chassis models connected to the RF distribution system. Always save an FMA Configuration file to be used at a later time if changes become needed. FTG Device Configuration utility allows users to create a .RML configuration file that has the data to be transferred to and saved within the FTG gadget.
Both the FTG Channel Map and the FTG Installer Menu settings are learn, edited, and then written individually to an FTG device. Always save an FTG Configuration file for use at a later time if changes become needed or to configure extra FTG units. The FMA Configuration Utility allows you to create an FMA Configuration (.fma) file for updating an FMAs broadcast knowledge . Every LG/Zenith TV/STB capable of receiving the Channel Map broadcast from the FMA might be configured with the identical channel lineup. Installer Menu settings are depending on chassis mannequin IDs; only the model whose Installer Menu settings are being broadcast shall be affected.